AltRider DualControl Brake Riser for the Aprilia Tuareg 660

AltRider DualControl Brake Riser for the Aprilia Tuareg 660

PLEASE NOTE: This is for JUST THE RISER.

The average person takes 0.5 to 1 full second to react to hazards. Traveling at 60 MPH, a rider will travel 25 to 50 feet before being able to properly react. Most OEM brake pedals have a single-positioned small footprint, yet most ADV riders substantially change foot positioning as they switch between standing and sitting. If your foot is not already situated correctly on the rear brake pedal, you are now potentially doubling reaction time and distance to make what could be a critical stop. This is why you see all motorcycle racers with 1 or 2 fingers on the front brake lever in photographs. AltRider has taken away this additional hazard with the patent pending DualControl Brake System. There are two parts to the AltRider DualControl Brake System that enhance control and reaction time; a riser, and an enlarger plate.

Riser
When in a seated position, a rider’s bent knee naturally puts the angle of the foot pointed down 90 degrees from the lower leg, while a standing position creates a straighter leg and raises the angle of your foot to a more horizontal position. Using the OEM brake pedal, there is no way to keep the correct brake control position when both sitting and standing. With the AltRider enlarger and riser combined, there are now two levels in which to engage the rear brake, putting your foot in optimal position regardless of riding position. As every rider is different, there are two riser heights available depending on your riding style. For those needing additional customization, risers can also be swapped out.

Enlarger
The ever-changing terrain of off-road riding means your entire body is constantly moving and adjusting. The billet aluminum enlarger plate gives your foot a greater surface area to work with, affording you more control of the rear brake. The enlarger plate is precision fit to each bike model ensuring long-term stability. Optional and replaceable grip pins are provided for further customization.

Both products are available separately or as a kit.

• Stainless steel bottom plate and hardware to endure the abrasions of off-road riding
• 100% designed and manufactured in the USA
• 25.4 mm riser available
• Optional and replaceable pins included for enhanced grip
• Enlarger and Riser available in black or silver
• Patent Pending

AltRider DualControl Brake Enlarger for the Aprilia Tuareg 660

AltRider DualControl Brake Enlarger for the Aprilia Tuareg 660

The average person takes 0.5 to 1 full second to react to hazards. Traveling at 60 MPH, a rider will travel 25 to 50 feet before being able to properly react. Most OEM brake pedals have a single-positioned small footprint, yet most ADV riders substantially change foot positioning as they switch between standing and sitting. If your foot is not already situated correctly on the rear brake pedal, you are now potentially doubling reaction time and distance to make what could be a critical stop. This is why you see all motorcycle racers with 1 or 2 fingers on the front brake lever in photographs. AltRider has taken away this additional hazard with the patent pending DualControl Brake System. There are two parts to the AltRider DualControl Brake System that enhance control and reaction time; a riser, and an enlarger plate.

Riser
When in a seated position, a rider’s bent knee naturally puts the angle of the foot pointed down 90 degrees from the lower leg, while a standing position creates a straighter leg and raises the angle of your foot to a more horizontal position. Using the OEM brake pedal, there is no way to keep the correct brake control position when both sitting and standing. With the AltRider enlarger and riser combined, there are now two levels in which to engage the rear brake, putting your foot in optimal position regardless of riding position. As every rider is different, there are two riser heights available depending on your riding style. For those needing additional customization, risers can also be swapped out.

Enlarger
The ever-changing terrain of off-road riding means your entire body is constantly moving and adjusting. The billet aluminum enlarger plate gives your foot a greater surface area to work with, affording you more control of the rear brake. The enlarger plate is precision fit to each bike model ensuring long-term stability. Optional and replaceable grip pins are provided for further customization.

Both products are available separately or as a kit.

• Stainless steel bottom plate and hardware to endure the abrasions of off-road riding
• 100% designed and manufactured in the USA
• 25.4 mm riser available
• Optional and replaceable pins included for enhanced grip
• Enlarger and Riser available in black or silver
• Patent Pending

AltRider DualControl Brake System for the Aprilia Tuareg 660

AltRider DualControl Brake System for the Aprilia Tuareg 660

The average person takes 0.5 to 1 full second to react to hazards. Traveling at 60 MPH, a rider will travel 25 to 50 feet before being able to properly react. Most OEM brake pedals have a single-positioned small footprint, yet most ADV riders substantially change foot positioning as they switch between standing and sitting. If your foot is not already situated correctly on the rear brake pedal, you are now potentially doubling reaction time and distance to make what could be a critical stop. This is why you see all motorcycle racers with 1 or 2 fingers on the front brake lever in photographs. AltRider has taken away this additional hazard with the patent pending DualControl Brake System. There are two parts to the AltRider DualControl Brake System that enhance control and reaction time; a riser, and an enlarger plate.

Riser
When in a seated position, a rider’s bent knee naturally puts the angle of the foot pointed down 90 degrees from the lower leg, while a standing position creates a straighter leg and raises the angle of your foot to a more horizontal position. Using the OEM brake pedal, there is no way to keep the correct brake control position when both sitting and standing. With the AltRider enlarger and riser combined, there are now two levels in which to engage the rear brake, putting your foot in optimal position regardless of riding position. As every rider is different, there are two riser heights available depending on your riding style. For those needing additional customization, risers can also be swapped out.

Enlarger
The ever-changing terrain of off-road riding means your entire body is constantly moving and adjusting. The billet aluminum enlarger plate gives your foot a greater surface area to work with, affording you more control of the rear brake. The enlarger plate is precision fit to each bike model ensuring long-term stability. Optional and replaceable grip pins are provided for further customization.

Both products are available separately or as a kit.

• Stainless steel bottom plate and hardware to endure the abrasions of off-road riding
• 100% designed and manufactured in the USA
• 25.4 mm riser available
• Optional and replaceable pins included for enhanced grip
• Enlarger and Riser available in black or silver
• Patent Pending

AltRider Adventure II Foot Pegs for the Aprilia Tuareg 660

AltRider Adventure II Foot Pegs for the Aprilia Tuareg 660

The AltRider take on the Adventure Foot Peg is a strong, lightweight peg that is CNC cut from 6061-T6 aluminum billet, bead blasted and finished in black anodize. The 58 mm wide footpegs provide a larger area for boot placement and increased control, while the included cleat screws provide the grip you need, even in the worst conditions.

• Strong and lightweight, CNC aluminum
• Direct replacement for OEM pegs, all hardware and uprated springs included
• Includes cleat screws for added grip
• 58 mm wide x 122 mm long platform, giving larger area for boot placement
• Designed to prevent mud and dirt build up on the pegs

The AltRider Adventure II Foot Peg is a direct replacement for the OEM pegs, and all hardware needed for installation, including uprated springs, is provided. The increased width of the pegs allow for a more stable platform for the rider, while the additional length provides extra leverage for control. Increase your confidence and control of the bike with a larger platform, and increased grip. The pegs are designed to prevent mud and dirt build up, while providing sure footing for your adventure riding.

Fitment:

• Aprilia Tuareg 660 (2022-current)