Denali S4 LED Light Kit with DataDim™ Technology
The S4 is the first light we developed as part of our new S-Series product line. At over 3000 lumens and only $184.99 per pod, the S4 provides more light per dollar than just about anything else on the market. The new S-Series lights were specifically engineered to reduce cost without sacrificing performance, quality or durability. In fact, the S4 features the same high intensity LEDs as the D-Series lights, but utilize a single-piece optic and sealed beam construction to reduce the number of unique components. The result is a super durable high performing light that won't break the bank. The fixed lens features two flood optics and two spot optics to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing.
Consistent with D-Series lights, the S4 features DENALI’s innovative DataDim™ Technology that enables the lights to be upgraded in seconds to dual intensity by connecting a plug-n-play DataDim™ Controller (DNL.WHS.11000, sold separately) that will automatically switch the lights between half and full intensity with your vehicle's original high beam switch.
High-Intensity Series Cree LEDs outputting 6132 lumens per kit.
- DrySeal™ Submersible Waterproof light can withstand the most extreme environments
- LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
- Low profile mounting bracket with stainless steel hardware included
- LED’s: (8x) 7 Watt Cree XPL HI
- Power Draw: 4.6 Amps
- Beam Distance: 540 Feet
- Beam Width: 100 Feet
- Raw Lumens: 6132
- Intensity: Single Intensity Harness
- DataDim™ Compatible: Yes
- Operating Voltage: 12 VDC
- Pod Size: 2.75” Square x 1.97” Deep (each)
- Pod Weight: 0.8 lbs (each)
- IP67 Waterproof & Submersible
What's in the box:
(2x) LED Light Pods
(2x) Hinge Mounts with M8 Stainless Steel Hardware
(4x) Zip Ties & (1x) Adhesive Mounting Square
OPTIONAL WIRING HARNESS
2.0 Premium Wiring Harness - DNL.WHS.10900 $138.99
Features high-quality waterproof components and is designed to power two DENALI 2.0 LED Light Pods. It features low profile, water tight connectors and premium molded wire to ensure moisture is kept out of the system. The harness includes a completely sealed, waterproof switch that was engineered from the ground up to withstand harsh out-door abuse on powersports vehicles. Its clever design can be either flush or bar mounted.
The harness also features our clever HotSwap™ design that enables an effortless swap from the standard single-intensity relay to our Dual-Intensity DataDim™ Controller. (sold separately). Plug in our DataDim™ Controller to enable the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch.
What’s In The Box?
- (x1) Premium Wiring Harness
(x1) Single-Intensity Relay
(x1) DrySeal™ ON-OFF Waterproof Illuminated Switch
(x1) 7/8 inch Handlebar Switch Mount
(x1) 1 inch Handlebar Switch Mount
(x2) Self Tapping Screw
(x1) Adhesive Pad
(x4) Zip Ties
DENALI DRL Wiring Harness with 3 Position Switch - DNL.WHS.12100 $56.49
This DENALI DRL wiring harness kit features high-quality waterproof components and is designed to power two DENALI DRL Light Pods. It features low profile water tight connectors and high quality molded wire to ensure moisture is kept out of the system. The harness includes a completely sealed waterproof switch that was engineered from the ground up to withstand harsh conditions on powersports vehicles. It’s clever design can be either flush or bar mounted. The switch enables independent dimming of the lights separate from the vehicle’s OEM lighting system.
High quality construction with plug-n-play connectors
- Compatible with all DENALI DRL (Daytime Running Lights)
- Enhances ease of installation
- Allows use of the included 3-position switch (high-low-off)
- Designed & engineered by DENALI in the USA
What’s in the box:
DENALI DRL harness
- 3-position switch
- ⅞” Handlebar Switch Mount
- Installation instructions