 |
 |
 |
|
D7 PRO Multi-Beam Driving Light Pod with Modular X-Lens System
PLEASE NOTE: You MUST select the quantity of light pods you require and your wiring harness choice via the drop down menu. If you select NONE for wiring harness, you will receive only the light pod(s).
After 2 years in the making, we are thrilled to introduce the highest performing, and most feature-rich 4-inch driving light ever released! Have you ever wondered what 23,000 lumens does to a dark landscape? It will blow your mind, and we haven't even started yet.
Picture the most powerful driving light ever built, then add a flood beam, spot beam, and hybrid beam, a multi-color DRL mode, two fully dimmable circuits, and the option to change the beam shape and beam color on the fly. That's the D7 PRO, and it looks even better than it sounds.
The D7 PRO features a split dual-circuit design that allows fully independent on/off and dim of a center flood beam and outer spot beam. Use our revolutionary DialDim Switch or CANsmart Controller to effortlessly control all lighting functions from a single halo dimmer switch or the vehicle OEM handlebar controls.
Add to that, our patent pending X-Lens system which allows you to change the center flood or DRL beam color to white, amber, or selective yellow on-the-fly giving riders more flexibility and functionality than ever before.
Last but not least, the D7 PRO has a "DRL Boost Mode" which allows you to run the center optics as a dim DRL or dial it up to 100% up to create a high-power flood beam. The innovative center optics can also flash in sync with your turn signals when paired with the amber X-Lenses.
D7 PRO Pod Features
- HiDrive LEDS 11,900 Lumens Per Pod - Seven 14-Watt LEDs combined with our proprietary TIR optics make this the brightest light under 4.5” ever released
- Dual-Beam Technology - Independent control (and dimming) of center flood beam, outer spot beam, or all-on hybrid beam
- Modular Snap-On X-Lens - Enables customizable beam shape and color on-the-fly. Interchange able center flood beam color in white, amber, or selective yellow
- DRL Boost Mode - Drive the center LEDs as a low intensity DRL, or dial up the power to generate a massive high-intensity flood beam
- Integrated Turn Signal Mode - Run the center flood optics as an amber DRL or flood light that will flash in sync with the vehicle turn signals
- CANsmart & DialDim Compatible - Control both circuits on a single DialDim switch or unlock over 20 features & settings using the CANsmart accessory manager
D7 PRO Specs (Single Pod)
-
LED's: (7x) 14 Watt Cree XML3
-
Power Draw: 98 Watts / 8 Amps
-
Raw Lumens: 11,900
- Spot Beam Distance: 1250 Feet (380 Meters)
-
Flood Beam Width: 250 Feet (75 Meters)
- DataDim™ Compatible: Yes
-
Operating Voltage: 9-32 VDC
-
Pod Size: 4.4" Round x 2.9" Deep
-
Pod Weight: 1.8 lbs
- IP68 & 69K Waterproof, Submersible, & High-pressure Spray
- E Mark Approved Spot Lens (ECE R112 Driving Beam)
What’s Included?
D7 PRO Light Pod (DNL.D7P.050) includes:
-
(1x) D7 PRO Light Pod (w/ mounting hardware)
- (3x) X-Lenses (Clear, Amber, & Selective Yellow)
-
(1x) 2-into-1 Single-Circuit Wiring Adapter
The D7 PRO
Pair Includes:
-
(2x) D7 PRO Pods (DNL.D7P.050)
OPTIONAL WIRING HARNESS
2.0 Premium Wiring Harness - DNL.WHS.10900 $138.99
Features high-quality waterproof components and is designed to power two DENALI LED Light Pods. It features low profile, water tight connectors and premium molded wire to ensure moisture is kept out of the system. The harness includes a completely sealed, waterproof switch that was engineered from the ground up to withstand harsh out-door abuse on powersports vehicles. Its clever design can be either flush or bar mounted.
The harness also features our clever HotSwap™ design that enables an effortless swap from the standard single-intensity relay to our Dual-Intensity DataDim™ Controller. (sold separately). Plug in our DataDim™ Controller to enable the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch.
What’s In The Box?
-
(x1) Premium Wiring Harness
- (x1) Single-Intensity Relay
- (x1) DrySeal™ ON-OFF Waterproof Illuminated Switch
- (x1) 7/8 inch Handlebar Switch Mount
-
(x1) 1 inch Handlebar Switch Mount
- (x2) Self Tapping Screw
- (x1) Adhesive Pad
- (x4) Zip Ties
DENALI DRL Wiring Harness with 3 Position Switch - DNL.WHS.12400 $74.99
This DENALI DRL wiring harness kit features high-quality waterproof components and is designed to power two DENALI DRL Light Pods. It features low profile water tight connectors and high quality molded wire to ensure moisture is kept out of the system. The harness includes a completely sealed waterproof switch that was engineered from the ground up to withstand harsh conditions on powersports vehicles. Its clever design can be either flush or bar mounted. The switch enables independent dimming of the lights separate from the vehicle’s OEM lighting system.
Features:
-
High quality construction with plug-n-play connectors
- Compatible with all DENALI DRL (Daytime Running Lights)
- Enhances ease of installation
- Allows use of the included 3-position switch (high-low-off)
- Designed & engineered by DENALI in the USA
What’s in the box:
-
DENALI DRL harness
3-position switch
- ⅞” Handlebar Switch Mount
- Installation instructions
|
|
|
 |
|
 |
|
