Home > Accessories > Electrical > Fuse Blocks/ Wiring Accessories >

DENALI PowerHub2 fuse block - master ground block and wiring harness for motorcycles
DENALI PowerHub2 fuse block - master ground block and wiring harness for motorcycles
Our Price: $175.49

Product Code: ELC.00.30000

Description Specs / Instructions

DENALI PowerHub2 fuse block

Made in America!

The PowerHub2 Power Distribution Module, manufactured by DENALI allows you to safely connect up to 6 electronic devices to your motorcycle in a clean, professional manner. It is CAN-Bus compatible and includes six 15-amp rated and fused outputs, six ground posts, and a plug-and-play wiring harness for direct battery hookup. Each of the six outputs can be individually set as "always on" or "switched" on/off with the ignition of the motorcycle. Instead of attaching multiple ring terminals to your battery, use a PowerHub2!
The CAN-bus safe DENALI PowerHub2 has been designed to allow simple and easy installation of electrical components. Each unit has six individually fused outputs. These are not your ordinary outputs. Simply plug the fuse in to the left or the right on the circuit board to make the accessory live all of the time or switched on/off with the bike's ignition.

The entire unit is rated for 30 Amps (360 watts). Each of the six circuits can handle up to 15A (180W) each - without exceeding a total sum of 30 Amps simultaneously.

When installing the PowerHub2 on BMW CAN-Bus equipped motorcycles, use either the 194 Marker Bulb CAN-Bus adapter available separately, or tap the original BMW power socket hot wire.

What's in the Box:
  • PowerHub2 fuse block
  • 2 ring terminals
  • Wiring harness for connecting PowerHub2 to battery (includes switched "trigger" wire with Posi-tap connector)
  • Self-adhesive hook and loop pad for providing a quick-release attachment method for connecting the PowerHub2 to a flat surface

What else do I need to buy? Mini ATM fuses are not included.

An assortment of mini ATM fuses is available HERE. Replacement 30amp relay available HERE.

Can I hook up a battery charger to my motorcycle via the Power Hub 2? YES. Just be certain you place the fuse in the position for continuous power.

How do I connect the PowerHub to a BMW CAN-BUS bike? Connect either the Electrical Connection 194 Marker Bulb CAN-BUS Adapter (part EC.02350, available separately), or the original BMW power socket hot wire to the Powerhub's switched yellow wire. Then connect the Powerhub's black and red wires directly to the battery.

How do I convert watts to amps? Amps to watts? Watts = Volts x Amps. Most motorcycles run at 12 Volts, so the equation becomes Watts = 12 x Amps. Amps = Watts/12. Use this calculator to help convert watts to amps (or amps to watts). Fill in any 2 fields and hit submit for the result. Power is measured in watts. Current is measured in amps. Fuses are rated in amps. Accessories generally give their power or current rating.


We found this table handy with our own wiring projects; use it as a guide for sizing accessory wire on your motorcycle. When on the border line, always use a lower gauge number (larger wire) than specified in this chart.

Wire Gauge Selection Table 12 Volt Circuit

AMPS 3' 5' 7' 10' 15' 20' 25'
0 to 5 18 18 18 18 18 18 18
6 18 18 18 18 18 18 18
7 18 18 18 18 18 18 18
8 18 18 18 18 18 16 16
10 18 18 18 18 16 16 16
11 18 18 18 18 16 16 14
12 18 18 18 18 16 16 14
15 18 18 18 18 14 14 12
18 18 18 16 16 14 14 12
20 18 18 16 16 14 12 10
22 18 18 16 16 12 12 10
24 18 18 16 16 12 12 10
30 18 16 16 14 10 10 10

Note: A small production run of the Powerhub2 had an incorrect assembly issue that caused the circuit board to sit too high to allow for proper seating of the cover. As of December 2013, this issue has been corrected with all subsequent production. All of the PowerHub2 currently available allow plenty of clearance for the fuses and the cover to close securely.

  • Weather-resistant
  • Durable
  • Choice between switched and constant power.
  • Compact
  • 2 spare fuse holders
  • Mini-buss fuses easily available in an emergency.
  • CANbus-compatible

Average Rating: 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
Denali PH2 May 3, 2019
REVIEWER: Connors Dilemma from ON Canada  
Nice design, relay is nested in the unit so external relay not required. Price is on the high side but worth it in the long run. Haven’t installed the unit yet but I don’t foresee any problems. The power and ground wires provided are long enough to locate the box anywhere on the bike and the wires are very flexible to help with the routing. Well engineered unit!

Was this review helpful to you?