Home > Tools
Sort By:
Page of 1
BestRest  BestHex Hex Nut BestRest BestHex Hex Nut

BestRest BestHex Hex Nut

Sizes: 17mm, 19mm, 24mm, 26mm, 27mm, and 32mm.

Looking for a way to reduce the number of tools you carry on your bike? Got an axle nut that requires a large wrench to change a tire or make other repairs?

Now you can leave your large tools at home - all you need is a BestHex Wrench and a BestRest Tire Iron. The tire iron becomes the "handle" of the Wrench, providing the leverage you need to loosen (or tighten) the nut.

PRICE: $32.99
Enduristan Small Parts Organizer Enduristan Small Parts Organizer

Enduristan Small Parts Organizer


Organize your stuff!

Today we travel with chargers for our various electronic gear such as smart phones, tablets, GPS, cameras. We need a place for all the memory cards, the different cables, special camera equipment and different batteries. Developing our new Small Parts Organizer, the search is over. The organizer features not less than 7 zipper pockets and countless of holding loops in four layers. On the outside, there are white printed areas to mark the content: If the organizer is used to store camera equipment, mark it with "Camera", alternatively use it for spare parts, first aid equipment or anythings else.

PRICE: $54.99
Motion ProDeluxe Auxiliary Tank Motion ProDeluxe Auxiliary Tank

Motion ProDeluxe Auxiliary Tank

• For use with fuel injected models with external fuel pumps as well as standard carburetor equipped motorcycles
• Upgraded petcock for easier opening and closing
• Built-in fuel return line and breather on cap for use on fuel injected motorcycles
• Graduated scale on side of bottle provides accurate measurement of fluid volume
• Includes 4 ft. of 1/4" fuel line
• Tank can also be used for refilling transmission oil on some late model MX bikes
• Holds up to 2000cc or 1/2- gallon of fluid
• Not designed for fuel storage

PRICE: $125.95
TurnCycle Centre Stand Disc with leveling mats TurnCycle Centre Stand Disc with leveling mats

TurnCycle Centre Stand Disc with leveling mats

(20 inch) Parking Problems? Not Anymore! Just ride your motocycle in, use you TURNCYCLE and be ready to ride out again. The TURNCYCLE Centre Stand Disc is a robust designed turntable that you use in your parking spot. Drive in, TURNCYCLE, Drive out!

This is the complete Turncycle® package, including levelling mats. Heavy duty construction, non-slip surfaces. Will work with larger touring motorcycles that require a larger footprint and motorcycles with wider or swept centre stands. i.e. (KTM,BMW)

Capacity 1000 lbs or (454 kg) measures 1/2” (12.7 mm) thick and 20” (508 mm) diameter, disc weight 17.69 lbs. (8.03 kg).


PRICE: $234.99
BestRest TireIron BeadBrakR (tubeless) BestRest TireIron BeadBrakR (tubeless)

BestRest TireIron BeadBrakR (Tubeless)

This kit gives you everything you need to change your own tires, or to remove the tire from the rim so you can fix a flat. Works in the shop, the garage, or on top of a mountain.
The BestRest TireIron BeadBrakR (TIBB) is a levering device that incorporates a trio of tire irons into the mechanism used to remove the rubber tire from the metal rim. When the bead is free from the rim, use those same tire irons to remove the tire from the rim. What could be more simple, more efficient, more utilitarian?
Every rider’s kit should include a variety of tire repair products, including tire irons, a tire inflator, AND a bead breaker. Why a bead breaker? When repairs require removal of the tire from the rim, or if you need to change your tires, you'll need special tools. That's because the rubber tire sidewall is actually glued to the rim, and the bead is held in place by the natural outward flex of the tire carcass. Breaking this chemical and mechanical bond is called "breaking the bead". Unless you can do this with the tools you’re carrying, you might not be able to fix your tire. Plain translation: you’re in for a long walk home.

Features:
Because we know the BeadBrakR will see some pretty rough conditions around the world we selected materials that’ll stand up to the elements:

  • The 8.5” long tire irons are gold zinc plated to prevent corrosion
  • Rustproof 17-7 and 304 stainless steel, precision laser cut and formed and TIG welded for maximum strength
  • The 17-7 alloy used also makes aircraft cockpit doors bulletproof
  • Small plywood blocks keep the BeadBrakR from scratching the rim
  • For working on soft surfaces, a plywood “sand foot” has been added to spread the load
  • Lanyards added to the ring pins to prevent loss in the field
  • A comprehensive instruction sheet which also includes tire mounting and demounting tips
  • A set of plastic rim protectors, a bottle of specially formulated BeadGoop tire mounting lubricant, a valve stem multi-tool, and a Cordura storage pouch that's big enough for your own collection of tire patches & plugs

PRICE: $299.00
HEX ezCAN Accessories  Manager - Mojave - BMW R1300GS HEX ezCAN Accessories Manager - Mojave - BMW R1300GS

HEX ezCAN Accessories Manager - Mojave - BMW R1300GS

This is the HEX ezCAN Mojave accessory manager for the BMW motorcycles. Customize your bike and make it safer to ride.

This device works on the BMW R 1300 GS – KA1 (2024+)

Simplify adding electrical components to your motorcycle and customize their functions with the HEX ezCAN accessory manager. This device is ready to power left and right auxiliary lights on individual, high power, 10 amp continuous to 25 amp peak output circuits as well as an auxiliary brake light and accessory power on separate, low power, 4 amp output. All you need to do is install the ezCAN under your seat with the included Velcro, route and connect the pre-connected battery cables, plug the ezCAN into the motorcycle CAN-Bus with the factory type connectors and plug your accessories into the four color coded outputs. Since this unit listens directly to the factory CAN-Bus system, there is no need to install extra switches for your auxiliary lights or horn as the ezCAN interprets commands from your motorcycle’s existing controls, including the rotary Multi Controller ("Wunder wheel") adjacent to the left switch cluster. With the free, downloadable, MAC or Windows PC compatible HEX ezCAN software, you can also modify your setup with your computer via a waterproof USB connection to modify which devices receive high or low power, power an auxiliary horn as well and control the functionality of your auxiliary lighting, brake lights, or accessories to meet your needs and preferences. Put the “can” into adding powered equipment your motorcycle’s CAN-Bus system with the feature rich ezCAN Accessory Manager by HEX Code.

The downloadable Mac and Windows PC versions of the HEX ezCAN software allows configuration and mapping of the 4 color coded output channels.

The red and orange high power output channels as well as the yellow and white low power output channels can each be independently mapped with one of 3 function combinations.

Function mapping combinations:

  • Default setting of high power left Auxiliary Light, high power right Auxiliary Light, low power Auxiliary Brake Light and low power Accessory Power
  • Optional setting of high power Auxiliary Horn, high power Accessory Power, low power left Auxiliary Light and low power right Auxiliary Light
  • Optional setting of high power Auxiliary Horn, high power left and right side Auxiliary Lights on splitter, low power Auxiliary Brake Light and low power Accessory Power

With the configuration software, each function is highly customizable with plenty of options to ensure your safety and preference needs are met.

Auxiliary Light function options include:

  • Fuse setting
  • Low beam daytime brightness control
  • Low beam night time brightness control
  • High beam daytime brightness control
  • High beam night time brightness control
  • Off when turn signal active option - turns the corresponding auxiliary lights off when a turn signal is active to prevent washout of the turn signal
  • Strobe when horn active option - strobes auxiliary lights when horn is active
  • Strobe on "flash to pass" option - strobes auxiliary lights 3 times when flash to pass is activated by pressing high beam 3 times quickly
  • Inverse flashing when hazards active option - flashes hazards and auxiliary lights alternately to prevent washout of the hazard flashers
  • Auxiliary lighting flash intensity control

All Auxiliary Lights can be toggled on or off by holding the turn signal cancel button for 3 seconds and brightness can also be controlled by the BMW Multicontroller or "Wonder Wheel" at any time.

Auxiliary Brake Light function options include:

  • Fuse setting
  • Auxiliary rear light brightness
  • Auxiliary brake light brightness
  • No flashing option - standard brake lighting
  • Flash on braking option - auxiliary brake light flashes under any active braking
  • California legal flashing option - auxiliary brake light flashes 4 times at 4Hz then remains on during active braking
  • Emergency stop signal option - auxiliary brake light flashes during deceleration regardless of braking
  • California legal with Emergency Stop Signal option - combination of California legal when braking and Emergency Stop Signal during non braking deceleration

Accessory Power function options include:

  • Fuse setting
  • Delay time-out settings

Installation:

  • Download and install the Mac or Windows PC software here
  • Mount the ezCAN under your motorcycle's pillion seat
  • Route and connect the negative and positive battery wires to your motorcycle's battery
  • Plug the ezCAN into the RDC control connection on your motorcycle's CAN-bus, either in-line or capped
  • Connect your electronic accessories to the four color coded output connections
  • Configure the ezCAN based on your needs and preferences

Features:

  • Waterproof and dust-proof
  • Single switch control of devices
  • Enables additional safety features
  • Will not void warranty
  • Plugs into and is compatible with existing CAN-Bus system
  • Configurable via USB with Mac and PC software
  • 4 output channels with fuse protection
  • Waterproof micro USB connector
  • Battery connection with fuse
  • 2 CAN-Bus connectors for in line connecting
  • 2 high power outputs (10A continuous / 25A max 20 seconds)
  • 2 low power outputs (4A continuous)
  • Device measures 2.2in long by 1.2in wide by 0.6in thick

Fits:

  • R1300GS
Included in the box:

  • 1x HEX ezCAN Mojave Device
  • 1x Micro USB Cable
  • 4x 2-wire Male stubs
  • 4x 1-wire terminated.
  • 4x Blanking seals
  • 3x Blanking Plugs
  • 20x Cable Ties
  • 1x Adventure Sleeve on the device

PRICE: $319.00
BESTREST CyclePump Tire Inflator  (90  DEGREE RIGHT ANGLE CHUCK VERSION) BESTREST CyclePump Tire Inflator (90 DEGREE RIGHT ANGLE CHUCK VERSION)

BESTREST CyclePump Tire Inflator

RIGHT ANGLE air chuck, for bikes with limited clearance between valve stem and hub or brake rotors. The right angle design means the air hose comes off at a 90° angle, and passes below the brake rotors.


NEWS FLASH April 25, 2016

The CyclePump Adventure has been replaced the EXPEDITION Model Tire Inflator

LIFETIME Warranty!

Plainly stated, there is no better motorcycle tire inflator available anywhere, at any price. For over 14 years the CyclePump has held the reputation for being the best on the street or on the trail. Our LIFETIME warranty confirms that fact. Since 2002 we've build over 25,000 of them here in Seattle, and shipped them around the world.

The CyclePump provides you with an EASY way to fill a flat tire or adjust tire pressure on the road, without resorting to inefficient CO2 cartridges, a frustratingly slow hand pump, or an imported tire inflator of questionable quality.

f you're looking for a CHEAP tire inflator then you'll want to shop somewhere else. There's plenty of inflators on the market for riders who value a lower purchase price, over the virtues of quality and reliability. Good luck, we'll see you on the trail.

At BestRest we don't sell the cheapest tire inflator, we sell the BEST. When you invest in a CyclePump you're getting the BEST motorcycle tire inflator on the market. Period. End of discussion. You'll pay more, but you'll get more.

Shawn Thomas used his CyclePump while leading a tour through the Andes Mountains, shadowing the riders of the Dakar Rally. At 16,000 feet the group's chase truck got a flat tire and the spare wasn't available. Shawn made repairs using a CyclePump Tire Repair Kit, then he used his personal CyclePump Tire Inflator to fill the truck tire. The group was back on the road in minutes. (Try doing that with a cheap imported inflator - heck, try breathing at 16,000 ft !!!)

The CyclePump is the Gold Standard, against which all other motorcycle inflators are measured. As we said above, if you want a CHEAP tire inflator, shop elsewhere. If you want the BEST tire inflator, spend a few minutes and read more.

The CyclePump uses a powerful 12 volt electric motor and a high quality metal compressor assembly that's been specially engineered for motorcycle applications. To run the CyclePump simply connect it to any 12 volt power source (like your bike's electrical accessory socket or the terminals of your battery). Attach the air hose to the tire, flip the switch, and begin filling your tire. Inflation time is typical

The CyclePump is proudly made in the USA. The case is precision crafted from aircraft-grade aluminum alloys. We don't use fragile plastic components that will break when you drop it on the ground. The switch and internal components are armored and "ruggedized" so the unit is virtually indestructible. The CyclePump is truly ready for an around-the-world expedition, which is why it's the inflator of choice for serious riders.

Here's a short video showing the story behind the CyclePump:
I Love Air - The CyclePump Story


PRICE: $325.00
BestRest MRS Motorcycle Recovery System Basic Kit 3:1 Ratio BestRest MRS Motorcycle Recovery System Basic Kit 3:1 Ratio

BestRest MRS Motorcycle Recovery System Basic Kit 3:1 Ratio

What is the Motorcycle Recovery System (MRS)?
The MRS is a z-drag rope-and-pulley system originally developed for mountaineering and rescue teams. That system was modified for motorcycle recovery operations. Recovery refers to the process of getting the bike back on the road or trail after taking an unexpected detour, or the process of getting the bike out of a bog or a sandpit.
The MRS reduces an object's lifting or pulling weight by 2/3, which means a solo rider weighing 200 pounds can literally lift a 600 pound motorcycle completely off the ground, or they can easily drag the bike out of any situation. Instructions clearly explain how to tie knots, how to hook up your bike, and how to use the system for maximum advantage.
The MRS is great for every trail rider, dualsport rider, and adventure rider. Whether you ride solo most of the time, or with a group of fellow enthusiasts, the MRS provides the means and methods to get your bike out of a difficult situation.
Component Specifications:
  • Primary rope is 8mm diameter, with a 3,000 lb. load rating
  • Flat webbing is 1" x 10 ft, with a 4,000 lb. load rating
  • Prusik loops are pre-tied, with a 1,700 lb. load rating
  • Pulleys are single or double (depending on kit), with a 5,000 lb. load rating
  • Carabiners are non-locking, chrome, with a 4,500 lb. load rating
What does the 3:1 Basic MRS system include?
  • 1 - 65' primary rope
  • 2 - 1" x 10' flat tubular webbingg
  • 2 - pre-tied prusik loops
  • 2 - rescue-quality non-locking carabiners
  • 2 - rescue-quality prusik-minding pulleys
  • 1 ea - quick reference "crib sheet" showing knots and setup
  • 1 ea - detailed instruction booklet - this info makes all the difference !!!
  • 1 ea - red nylon carry bag with reflective striping
  • Total size = 5x6x11" - easily fits in saddlebag or on tail rack
  • Total weight = 2 lb. 13 oz.
  • Mechanical advantage 3:1 (150 lb rider can LIFT 450 lb motorcycle)*
  • Recommended for small or medium bikes up to 500cc

PRICE: $349.00
HEX ezCAN Accessories  Manager for BMW K1600 and other models HEX ezCAN Accessories Manager for BMW K1600 and other models

HEX ezCAN Accessories Manager for BMW K1600 and other models

Simplify adding electrical components to your motorcycle and customize their functions with the HEX ezCAN accessory manager for your BMW K1600GT, K1600GTL, K1600 Bagger, S1000XR, F750GS, F850GS, F800GSA, F900XR. This device is ready to power left and right auxiliary lights on individual, high power, 10 amp continuous to 25 amp peak output circuits as well as an auxiliary brake light and accessory power on separate, low power, 4 amp output. All you need to do is install the ezCAN under your seat with the included Velcro, route and connect the pre-connected battery cables, plug the ezCAN into the motorcycle CAN-Bus with the factory type connectors and plug your accessories into the four color coded outputs. Since this unit listens directly to the factory CAN-Bus system, there is no need to install extra switches for your auxiliary lights or horn as the ezCAN interprets commands from your motorcycle’s existing controls, including the rotary Multi Controller ("Wunder wheel") adjacent to the left switch cluster. With the free, downloadable, MAC or Windows PC compatible HEX ezCAN software, you can also modify your setup with your computer via a waterproof USB connection to modify which devices receive high or low power, power an auxiliary horn as well and control the functionality of your auxiliary lighting, brake lights, or accessories to meet your needs and preferences. Put the “can” into adding powered equipment your motorcycle’s CAN-Bus system with the feature rich ezCAN Accessory Manager by HEX Code.

The downloadable Mac and Windows PC versions of the HEX ezCAN software allows configuration and mapping of the 4 color coded output channels.

The red and orange high power output channels as well as the yellow and white low power output channels can each be independently mapped with one of 3 function combinations.

Function mapping combinations:

  • Default setting of high power left Auxiliary Light, high power right Auxiliary Light, low power Auxiliary Brake Light and low power Accessory Power
  • Optional setting of high power Auxiliary Horn, high power Accessory Power, low power left Auxiliary Light and low power right Auxiliary Light
  • Optional setting of high power Auxiliary Horn, high power left and right side Auxiliary Lights on splitter, low power Auxiliary Brake Light and low power Accessory Power

With the configuration software, each function is highly customizable with plenty of options to ensure your safety and preference needs are met.

Auxiliary Light function options include:

  • Fuse setting
  • Low beam daytime brightness control
  • Low beam night time brightness control
  • High beam daytime brightness control
  • High beam night time brightness control
  • Off when turn signal active option - turns the corresponding auxiliary lights off when a turn signal is active to prevent washout of the turn signal
  • Strobe when horn active option - strobes auxiliary lights when horn is active
  • Strobe on "flash to pass" option - strobes auxiliary lights 3 times when flash to pass is activated by pressing high beam 3 times quickly
  • Inverse flashing when hazards active option - flashes hazards and auxiliary lights alternately to prevent washout of the hazard flashers
  • Auxiliary lighting flash intensity control

All Auxiliary Lights can be toggled on or off by holding the turn signal cancel button for 3 seconds and brightness can also be controlled by the BMW Multicontroller or "Wonder Wheel" at any time.

Auxiliary Brake Light function options include:

  • Fuse setting
  • Auxiliary rear light brightness
  • Auxiliary brake light brightness
  • No flashing option - standard brake lighting
  • Flash on braking option - auxiliary brake light flashes under any active braking
  • California legal flashing option - auxiliary brake light flashes 4 times at 4Hz then remains on during active braking
  • Emergency stop signal option - auxiliary brake light flashes during deceleration regardless of braking
  • California legal with Emergency Stop Signal option - combination of California legal when braking and Emergency Stop Signal during non braking deceleration

Accessory Power function options include:

  • Fuse setting
  • Delay time-out settings

Installation:

  • Download and install the Mac or Windows PC software here
  • Follow the ezCAN installation directions here: INSTALLATION GUIDE
  • Mount the ezCAN under your motorcycle's pillion seat
  • Route and connect the negative and positive battery wires to your motorcycle's battery
  • Plug the ezCAN into the RDC control connection on your motorcycle's CAN-bus, either in-line or capped
  • Connect your electronic accessories to the four color coded output connections
  • Configure the ezCAN based on your needs and preferences

Features:

  • Waterproof and dust-proof
  • Single switch control of devices
  • Enables additional safety features
  • Will not void warranty
  • Plugs into and is compatible with existing CAN-Bus system
  • Configurable via USB with Mac and PC software
  • 4 output channels with fuse protection
  • Waterproof micro USB connector
  • Battery connection with fuse
  • 2 CAN-Bus connectors for in line connecting
  • 2 high power outputs (10A continuous / 25A max 20 seconds)
  • 2 low power outputs (4A continuous)
  • Device measures 2.2in long by 1.2in wide by 0.6in thick

Includes:

  • HEX ezCAN device
  • Micro USB cable
  • Two Velcro strips
  • Four cable ties
  • Four stub connectors
  • Two blank connectors

Fits:

  • K1600GT - K48
  • K1600GTL - K48
  • K1600GTL - K48
  • K1600 Bagger - K61
  • S1000XR - K49
  • S1000XR - K69
  • F750GS - K80
  • F850GS - K81
  • F850GS Adv - K82
  • F900XR - K84

PRICE: $359.99
HEX ezCAN Accessories  Manager HEX ezCAN Accessories Manager

HEX ezCAN Accessories Manager

Simplify adding electrical components to your motorcycle and customize their functions with the HEX ezCAN accessory manager. This device is ready to power left and right auxiliary lights on individual, high power, 10 amp continuous to 25 amp peak output circuits as well as an auxiliary brake light and accessory power on separate, low power, 4 amp output. All you need to do is install the ezCAN under your seat with the included Velcro, route and connect the pre-connected battery cables, plug the ezCAN into the motorcycle CAN-Bus with the factory type connectors and plug your accessories into the four color coded outputs. Since this unit listens directly to the factory CAN-Bus system, there is no need to install extra switches for your auxiliary lights or horn as the ezCAN interprets commands from your motorcycle’s existing controls, including the rotary Multi Controller ("Wunder wheel") adjacent to the left switch cluster. With the free, downloadable, MAC or Windows PC compatible HEX ezCAN software, you can also modify your setup with your computer via a waterproof USB connection to modify which devices receive high or low power, power an auxiliary horn as well and control the functionality of your auxiliary lighting, brake lights, or accessories to meet your needs and preferences. Put the “can” into adding powered equipment your motorcycle’s CAN-Bus system with the feature rich ezCAN Accessory Manager by HEX Code.

The downloadable Mac and Windows PC versions of the HEX ezCAN software allows configuration and mapping of the 4 color coded output channels.

The red and orange high power output channels as well as the yellow and white low power output channels can each be independently mapped with one of 3 function combinations.

Function mapping combinations:

  • Default setting of high power left Auxiliary Light, high power right Auxiliary Light, low power Auxiliary Brake Light and low power Accessory Power
  • Optional setting of high power Auxiliary Horn, high power Accessory Power, low power left Auxiliary Light and low power right Auxiliary Light
  • Optional setting of high power Auxiliary Horn, high power left and right side Auxiliary Lights on splitter, low power Auxiliary Brake Light and low power Accessory Power

With the configuration software, each function is highly customizable with plenty of options to ensure your safety and preference needs are met.

Auxiliary Light function options include:

  • Fuse setting
  • Low beam daytime brightness control
  • Low beam night time brightness control
  • High beam daytime brightness control
  • High beam night time brightness control
  • Off when turn signal active option - turns the corresponding auxiliary lights off when a turn signal is active to prevent washout of the turn signal
  • Strobe when horn active option - strobes auxiliary lights when horn is active
  • Strobe on "flash to pass" option - strobes auxiliary lights 3 times when flash to pass is activated by pressing high beam 3 times quickly
  • Inverse flashing when hazards active option - flashes hazards and auxiliary lights alternately to prevent washout of the hazard flashers
  • Auxiliary lighting flash intensity control

All Auxiliary Lights can be toggled on or off by holding the turn signal cancel button for 3 seconds and brightness can also be controlled by the BMW Multicontroller or "Wonder Wheel" at any time.

Auxiliary Brake Light function options include:

  • Fuse setting
  • Auxiliary rear light brightness
  • Auxiliary brake light brightness
  • No flashing option - standard brake lighting
  • Flash on braking option - auxiliary brake light flashes under any active braking
  • California legal flashing option - auxiliary brake light flashes 4 times at 4Hz then remains on during active braking
  • Emergency stop signal option - auxiliary brake light flashes during deceleration regardless of braking
  • California legal with Emergency Stop Signal option - combination of California legal when braking and Emergency Stop Signal during non braking deceleration

Accessory Power function options include:

  • Fuse setting
  • Delay time-out settings

Installation:

  • Download and install the Mac or Windows PC software here
  • Mount the ezCAN under your motorcycle's pillion seat
  • Route and connect the negative and positive battery wires to your motorcycle's battery
  • Plug the ezCAN into the RDC control connection on your motorcycle's CAN-bus, either in-line or capped
  • Connect your electronic accessories to the four color coded output connections
  • Configure the ezCAN based on your needs and preferences

Features:

  • Waterproof and dust-proof
  • Single switch control of devices
  • Enables additional safety features
  • Will not void warranty
  • Plugs into and is compatible with existing CAN-Bus system
  • Configurable via USB with Mac and PC software
  • 4 output channels with fuse protection
  • Waterproof micro USB connector
  • Battery connection with fuse
  • 2 CAN-Bus connectors for in line connecting
  • 2 high power outputs (10A continuous / 25A max 20 seconds)
  • 2 low power outputs (4A continuous)
  • Device measures 2.2in long by 1.2in wide by 0.6in thick

Includes:

  • HEX ezCAN device
  • Micro USB cable
  • Two Velcro strips
  • Four cable ties
  • Four stub connectors
  • Two blank connectors

Fits:

  • R1200GS LC – K50
  • R1200GS Adv – K51
  • R1200RT LC – K52
  • R1200R LC – K53
  • R1200RS LC – K54
  • R1250GS – K50
  • R1250GSA – K51
  • R1250RT – K52
  • R1250R – K53
  • R1250RS – K54

PRICE: $369.99