Return to Outback Motortek Skid Plate - Kawasaki KLR 650 up to 2021
Sort By::
Page of 1


 
0 of 0 people found the following review helpful:
 
4 of 5 February 17, 2022
REVIEWER: Terry Boudreau from Robertville, NB Canada  


Was this review helpful to you?

 
1 of 1 people found the following review helpful:
 
5 of 5 Very pleased. September 15, 2021
REVIEWER: Cole Martin from Sudbury, ON Canada  
I researched alot of different skid plate options before going with the outback motortek. I like the design of the plate , especially the extra coverage in the water pump casing area. I'm pleased that this skid plate works seamlessly with my Dirtracks full crash bar setup that is also installed on the bike.  Installation was very easy. It even has a cutout for the oil drain plug- you do not need to drop the plate to do an oil change.

Was this review helpful to you?

 
0 of 0 people found the following review helpful:
 
4 of 5 Good looking skid plate, hard fit, 2000 KLR 650 June 3, 2021
REVIEWER: Florent Gouttin from Lethbridge, AB Canada  
Struggled a bit to fit the skid plate in place, had to file triangular plate holes so bolt would go through. Fits nice with wrap around DirtRacks engine crash bar. Had to cut off 1.25 inches slab at the back because it was in the way of my center stand. Normal oil drain bolt is well hidden above the aluminum plate: no chance of ripping it off accidentally. Plate looks well built with clean welds. Good price and from Canada, thanks Dualsport!

Was this review helpful to you?

 
0 of 0 people found the following review helpful:
 
5 of 5 Great service! November 11, 2020
REVIEWER: Wayne Veinott from Bridgetown Nova Scotia  
Ordered a Outback Motortek Skid Plate for my Gen 1 Klr.Wrote a side note to be sure it would fit with my Dirtracks crash bars.Got a phone call from Holly I believe and then a follow-up with Clint.They weren't very familiar with dirtracks crash bars, so as a result couldn't confirm fitment.Clint then suggested that he had an "old stock" plate from a different manufacturer.He sent the "Altrider" model out to me that same day and it bolted right on.The plate and the hardware were top shelf.Thank's for the great service and smokn' deal.

Was this review helpful to you?

 
0 of 0 people found the following review helpful:
 
4 of 5 Nice upgrade April 27, 2020
REVIEWER: MC from GTA ON Canada  
The skid plate is miles better than the stock. A definite must. The plate itself was well made, welds were solid and well done. Only problem was the holes on the bottom mounting bracket were too close together and I had to hand fit it a bit but overall a solid product and I'd say worth the money

Was this review helpful to you?

 
0 of 0 people found the following review helpful:
 
5 of 5 Great Skid Plate, even better service March 5, 2020
REVIEWER: Grant Jensen from Lloydminster, SK Canada  

There was a small issue with my order but Holly fixed me up right away, rush shipped the part and everything.

Couldnt be happier.

Was this review helpful to you?

 
0 of 0 people found the following review helpful:
 
5 of 5 May 1, 2019
REVIEWER: Scott Hickey from Cambridge, ON Canada  


Was this review helpful to you?

 
0 of 0 people found the following review helpful:
 
1 of 5 Poor quality/not as described October 24, 2018
REVIEWER: Jeffrey Lane from Lowbanks, ON Canada  
Im disappointed with this skid plate I researched alot of skid plates what drew me towards it was the bottom bolt relocation. I was happy with the customer service and shipping from dualsports but was disappointed with the quality of the plate mainly the hardware that was supplied. The bolts were junk one of the m6 taper collared bolts for the bottom bracket was deformed and unusable then the other 4 bolts were just that hex head straight shoulder bolts so much for flush mount even the skid plate had tapered holes machined into it for a tapered shoulder pan head bolts. so needless to say I went out to a bolt supplier and got the correct parts for another $20. Once I had all the correct parts install was ok started the 2 new side bolts and to get the top 2 started had to use a 2x4 to pry off my crash bars to slightly twist the skid plate so the upper holes would line up.Once everything was tightened the end fitment was nice but unless this part is revised I would not recommend it .

Was this review helpful to you?

 
0 of 0 people found the following review helpful:
 
5 of 5 Black skid plate August 14, 2018
REVIEWER: Bill Stillman from Dartmouth, NS Canada  
The skid plate was a perfect fit and looks great on the bike. I haven`t tested it out yet...but it is obviously built well and will be very sturdy I`m sure. In my opinion;I made a great choice.

Was this review helpful to you?

 
0 of 0 people found the following review helpful:
 
5 of 5 skid plate purchase November 20, 2017
REVIEWER: Michael Kearney from Elmvale, ON Canada  
excellent experience. Quick delivery. Good website, very user friendly.

Was this review helpful to you?