Home > Your Bike > BMW >

Outback Motortek Bronze Level Combo - BMW F800GS
Outback Motortek Bronze Level Combo - BMW F800GS
 
PRICE: $499.99


SKU: OBM-BMF800-BRCOM-BL


Colour*:

 
Description
 

Outback Motortek Bronze Level Combo - BMW F800GS

Purchase this Bronze Level Combo to outfit your BMW F800GS with the basic adventure bike necessities.

Lower Crash Bars / Engine Guards
Hand MIG welded – It’s all about the strength! We continue to follow our philosophy: toughness and functionality over appearance.

Quality 27mm/1.06″ steel tube with 2mm wall thickness – any low quality steel tubing BELOW THESE SPECS will be crushed when your 450lbs bikes crashes into the ground. Our crash bars will take the beat!

Less is often more. We didn’t try to cover the whole entire bike with crash bars that look like a cobweb. The F700/800GS models have very few tough mounting points, thus it makes more sense to create one solid and compact crash bar that stays close to the few mounting points instead of being far spread out that results in an overly flexible and “soft” structure. It will do more damage to your GS! Our compact and tough crash bars are the only way to go here to truly protect your BMW’s expensive and fragile parts.

Tough mounting points – No cutting corners here (either)! Precision laser cut pieces for perfect fitment using 4mm thick metal mounts. These parts absorb a lot of impacts from crashes, rather than your bikes chassis that”s worth thousands of dollars.

Stainless Steel Hardware – These bolts and nut will always and forever look nice and shiny. Unless your bike is covered in mud and dust…

Sandblasted to achieve the best possible adhesion of the coatings – it”s an extremely vital part of our manufacturing process. Sandblasted surfaces will withstand most surface scratches and give you a longer-lasting product.

Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!

4kg / 9lbs

Compatibility:
Lower Crash Bars/Engine guard: F650GS / F700GS / F800GS all years (parallel twin) – Does NOT fit 800GSA.

Upper Crash Bars
Hand MIG welded – It’s all about the strength! We continue to follow our philosophy: toughness and functionality over appearance.

Quality 27mm/1.06″ steel tube with 2mm wall thickness – any low quality steel tubing BELOW THESE SPECS will be crushed when your 450lbs bikes crashes into the ground. Our crash bars will take the beat!

Easy mounting – Mounting the upper crash bars to the bottom ones are as easy as it gets. Really.

Stainless Steel Hardware – These bolts and nut will always and forever look nice and shiny. Unless your bike is covered in mud and dust…

Sandblasted to achieve the best possible adhesion of the coatings – it”s an extremely vital part of our manufacturing process. Sandblasted surfaces will withstand most surface scratches and give you a longer-lasting product.

Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!

4kg / 9lbs

Compatibility:
Upper Crash Bars: Only F800GS 2008-2018 – Does NOT fit 800GSA.


Share your knowledge of this product. Be the first to write a review »