Home > Best Sellers >

Outback Motortek Honda Africa Twin CRF 1000L Combo - Package 1
Honda Africa Twin CRF 1000L - Outback Motortek  Package 1
 
Alternative Views


Our Price: $607.46


Product Code: OBATL1S


Color:


Bike Year*:


Qty:  
Description
 

Outback Motortek Honda Africa Twin CRF 1000L Combo - Package 1

One of the biggest advantages of our crash bars system is the all-around 27mm diameter tubing that rests on 4 and 5mm thick steel mounting tabs and offers reliable protection for fairing, radiator.

The design is based on the philosophy that less is often more, hence we created a compact, sturdy set of crash bars that do not reach far away from its mounting points. This system perfectly complements the sporty, aggressive lines of the Africa Twin 1000.

Our skid plate is wider than the entire engine. It means that debris, rocks etc. that fly at it will bounce off the skid plate and leave your engine, oil filter, exhaust system header intact.

Important: changing air filter in your Africa Twin is a big job that requires plastic fairings removal. With our crash bars mounted, you can still remove or have the plastic fairings removed by your dealer’s mechanic for air filter change.

Compatible with 2018 Africa Twin regular and Adventure Sports models.

SKID PLATE
Protects crucial areas of the engine – oil pan, engine case, oil cooler, oil filter and exhaust header! That’s a long list of very expensive parts to expose to any sort of damage that will reduce your Africa Twins value in no time.
Uniquely designed vent system – Not only unique but very-well thought out. No unnecessary holes were designed on this bash plate. As a result, your engine will less likely to overheat when mud and all sorts of debris from off-roading fly at the engine and get stuck between the skid plate and the engine/exhaust header.
Embossed ribs – These additional ribs add a lot of strength to the skid plate where it matters the most: the bottom. By embossing these ribs into the skid plate, we increase the cross-section of the material to about 9mm, hence this area is nearly twice as strong as other parts. Not to mention, these ribs act like gliders while your skid plate tries to slide over rocks, logs and other hard obstacles on offroad trails. Smaller surface means less resistance.
True off-road and adventure shape – What does that even mean?? It means we have experience in building top-notch bash plates. We avoid designing skid plates that are shaped like boxes, have sharp edges and corners and will guaranteed to restrict your rides off road. We design and build skid plates that you will only benefit from while riding on rough terrain.
4mm thick laser cut aluminum – Nothing is ever an overkill on an adventure bike, hence we choose to build our bash plates from this ridiculously tough and thick, yet lightweight material.
Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!

CRASH BARS
Quality 27mm/1.06″ steel tube with 2mm wall thickness – any low quality steel tubing BELOW THESE SPECS will be crushed when your 450lbs+ bike crashes into the ground. Our guards are designed to take the beat!
Less is often more. We didn’t try to cover the whole entire bike with crash bars that look like a cobweb. The all new Honda Africa Twin 1000 has very few tough mounting points, thus it makes more sense to create one solid and compact crash bar that stays close to the few mounting points instead of being far spread out. Our compact and tough crash bars are the only way to go here to truly protect your Honda’s expensive and fragile parts.
Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!


Share your knowledge of this product. Be the first to write a review »