 |
 |
 |
|
Cyclops KTM 790 Multi Function 3.0 Turn Signal Kit
We have heard you on wanting a brighter setup and have stepped it up with the 3.0 version, all new bodies, lenses Emitters and stems. We are also adding a running and brake light function.
Note that these are a minimalistic blinker setup, don't expect them to breathe fire like our Evo's will, But they do add a brake light and front running light functions, there is also a rear running light function, but for our personal bikes we have not used this so the brake light function stands out more when the brake is applied. You can make that choice when setting up your bike.
If you have a single indicator light for the blinkers that is not built into the display and is not LED you will need the diode kit (AKA DR650) If it is built in to the speedo display it should not require the diode kit. AKA 790adv, 701adv. 690 adv (BUILT IN) older 690s with separate indicator light do need the diode kit.. AND ALL OTHER KTMS THAT ARE TWIN CYLINDER BIKES do not need the diode kit.
All 500 and smaller CC KTM's and huskies will need the diode kit.
We built these originally around the KTM790/890adv (USA models), for that bike you don't need any of the options.(unless you want your factory dash indicator to flash instead of just come on) same with KTM990adv 2010 and newer and KTM 1090,1190adv.
Note that these are not intended for the EU bikes that came stock with LED Blinkers.
For other bikes please look over the options. Note we have not tested or state these will work on other model bikes in the same family, IE SMR, Duke , etc..
Now easily turn your blinkers into additional running lights and or brake lights (rear) for added visibility.
Bright white light in the front and red in the rear. Rear red brake lights will come on sequentially flashing twice then go to solid red!
Dazzling bright Amber sequential blinker functions.
All in a Extremely rugged rubber stock to help prevent damage from a tip over or impact with brush, trees etc. Bends back 90 degrees or more. These are durable but not unbreakable.
Plug and play kits using factory connectors for all KTMs and Huskies and the T700 Yamaha.. also available is a generic kit with Bullet connectors supplied, Great for your DR or almost any other bike with a single post blinker setup. These should work well on most other brand bikes that use a flasher, but you will have to add the connectors that are included in the kit.
Using a tail tidy that includes built in blinkers with these units can cause back feed problems, we do know that the Rottweiler tail tidy works well with these units using the optional LED flasher.
1 year function warranty.
Note: Crash damage or knocking off the blinker housing is not covered under warranty.
|
|
|
 |
|
 |
|
