Home > Your Bike > Yamaha >

AltRider Crash Bars for the Yamaha Super Tenere XT1200Z - Black
Crash Bars for the Yamaha Super Tenere XT1200Z - Black
Alternative Views

PRICE: $704.99

SKU: SU10-2-1000


Crash Bars for the Yamaha Super Tenere XT1200Z - Black

Now that you’re the proud owner of a Yamaha Super Tenere XT1200Z – or maybe have one on order – you want crash bars to protect it. Ours are built from one inch stainless steel so they're extremely resistant to rust, and feature beautiful hand TIG welds.

In designing these crash bars, we went through the trouble of maintaining the hidden connector in the front to yield a seamless system. Why is that important? It means the energy of a hard impact on one side can be transferred throughout the bars and to the other side. The three mounts on one side don’t have to take an entire impact load; instead, it is distributed across six mount mounts so none of them are overwhelmed. All of this is important because the crash bars will not only protect the fairing in the case of a crash, but also the Super Tenere’s exposed radiator.

We also conducted a thorough study to identify the bike’s contact points when on its side. This led to a crash bar design that offers a wide contact area between the crash bars and the ground. The other contact points will be the handlebar bar ends, and rear passenger peg – protecting the fairing, engine, radiator, and brake and shifter lever.

The crash bars allow full removal of the right-hand side panel. Because the left-hand side panel only requires periodic removal, the bars were not designed to allow removal of the panel. However, the left-hand side panel can be loosened enough to access to the hardware holding the gas tank in place – allowing the tank to be lifted up to gain access to the air box.

Available in silver or black.
  • Stainless T-304 construction
  • Hand TIG welding
  • 1 inch (25.4 mm) diameter tubing for strength
  • Available in silver or black
  • Height: 15 inches (38.1 cm)
  • Width: 20 inches (50.8 cm)
  • Depth: 18 inches (45.7 cm)
  • Weight: 11.5 lbs (5.2 kg)
  • Compatible with Yamaha Super Tenere XT1200Z (2010-current)
  • Compatible with Yamaha World-crosser Kit (OEM Frame Guards must be removed)

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

0 of 0 people found the following review helpful:
5 of 5 Great job May 21, 2021
REVIEWER: James Wadden from Saint sauveur , QC Canada  
Bars work well and Very personal service thank you

Was this review helpful to you?