AltRider Side Stand Switch Guard for the BMW R 1200 & R 1250 GS /GSA Water Cooled

AltRider Side Stand Switch Guard for the BMW R 1200 & R 1250 GS /GSA Water Cooled

The side stand switch is a serious vulnerability of the BMW R 1200 /1250 GS, allowing your ride to be disabled by a stray stick or other trail debris. Eliminate this weak point with a side stand switch guard from AltRider.

The AltRider guard is constructed from 1/16 inch (2 mm) anodized aluminum. This material provides solid, lightweight protection for the side stand switch. The design allows for complete coverage while enhancing the overall look of your bike. Installation is simple with the provided hardware. Available in black.

NOTE: Fits bikes built September 2013 or later. Switch must be attached with screw, not c-clip.

• AltRider motorcycle accessories are 100% designed and manufactured in the USA
• Side Stand Switch Guard prevents motorcycle from being disabled by trail hazards
• Constructed from 1/16 inch (2 mm) anodized aluminum Installs in minutes
• Available in black

• Compatible with R 1200 GS and GS Adventure
• Compatible with R 1250 GS and GS Adventure

AltRider Steel Mesh Headlight Guard for the BMW R 1200 & R 1250 GS / GSA

AltRider Steel Mesh Headlight Guard for the BMW R 1200 & R 1250 GS /GSA

A damaged headlight not only leaves you in the dark, it can mean between $800 and $1,800 in replacement costs from BMW depending on your headlight. Protect your GS's headlight with the AltRider Headlight Guard and avoid a costly mishap.

After a careful design process, the AltRider team developed a mesh pattern that deflects damaging debris with a deliberate design that minimizes any loss of illumination from the headlight. The smart pattern also complements the sleek design of the R 1200 and R 1250 GS. The face attaches to the steel frame with a custom machined aluminum ball and rubber socket connection that provides a sturdy connection free of any vibration. These innovative fasteners make removal of the guard for cleaning a cinch – no tools required. The steel guard is also interchangeable with all other versions of the AltRider headlight guard.

The frame of the headlight guard is anchored on all four corners of the headlight to provide a robust foundation to absorb impacts. All metal edges are laser-cut and grain finished. Unlike other available headlight guards, installation is simple and doesn’t require removal of the blinker stalks or any bodywork. The frame and mesh guard are available in brushed stainless or powdercoat black finish – both are incredibly resistant to rust and weathering. The headlight guard will fit both the halogen and LED headlights.

• All AltRider motorcycle accessories are 100% designed and manufactured in the USA
• Steel mesh face deflects debris without blocking light
• Ball and socket connectors allow removal of face without any tools
• Steel headlight guard interchangeable all other AltRider headlight guards
• Steel frame provides strong foundation and is highly resistant to rust and weathering
• Available in brushed stainless and powdercoat black finish

• Compatible with halogen and LED headlight
• Compatible with BMW Adaptive Headlight
• Compatible with R 1200 GS Adventure
• Compatible with R 1250 GS and GS Aventure
• Compatible with Rallye and Exclusive models

Outback Motortek Skid Plate - BMW R1250GS

Outback Motortek Skid Plate - BMW R1250GS

Outback Motortek offers protection for your BMW R1200GS’s engine and its components such as exhaust header and catalytic converter which may be badly exposed during off-roading without our skid plates. Protect your investment by investing into our engine protection.

Not engine mounted! It attaches to and only compatible with the Outback Motortek lower crash bars.

Compatibility:
Compatible with 2019-2023 BMW R1250GS and BMW R1250GSA. Compatible with Outback Motortek lower crash bars only. This product is model specific, thus we supply skid plate marked accordingly. Outback Motortek lower crash bars must be installed in order to install the skid plate. Also compatible with original BMW centre stand.

Outback Motortek Upper Crash Bars - BMW R1200GSA

Outback Motortek Upper Crash Bars - BMW R1200GSA

Upper Crash Bars for BMW R1200GSA: additional protection for the upper section on BMW R1200GSA.
Our upper crash bars use the truly tested and trusted lower crash bars as a base. Only compatible with GS Adventure model.

The Outback Motortek BMW R1200GS LC lower crash bars must be installed first in order to mount the 1200GSA upper crash bars.

Compatibility
Upper crash bars: Compatible with 2014-2019 BMW R1200GSA (Adventure).

Outback Motortek Protection Combo - BMW R1250GS

Outback Motortek Protection Combo - BMW R1250GS

This combo package includes a set of sturdy crash bars, which features four mountings points on each side. Our skid plate offers protection for parts of the exhaust system as well as the oil pan.

LOWER CRASH BARS

• Quality 27mm/1.06″ steel tube with 2mm wall thickness.
• Hand MIG welded – It’s all about the strength! We continue to follow our philosophy: toughness and functionality over appearance.
• Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!
• Tough mounting points – No cutting corners here (either)! Precision laser cut pieces for perfect fitment using 5mm thick metal mounts. These parts absorb a lot of impacts from crashes, rather than your bikes chassis.

Compatibility:
Lower Crash Bars: Compatible with 2019-2023 BMW R1250GS. This product is model specific, thus we supply lower crash bars marked accordingly. Compatible with GSA model without the OEM upper crash bars. Compatible with original BMW sump guard/skid plate/bash plate. Not compatible with Option 719 Billet cylinder covers.

SKID PLATE

• Protects crucial areas of the engine.
• 5mm thick laser cut aluminum – Nothing is ever an overkill on an adventure bike, hence we choose to build our bash plates from this ridiculously tough and thick, yet lightweight material.
• Tough mounting hardware – No cutting corners here (either)! Precision laser cut pieces for perfect fitment using 5mm thick metal mounts. These parts absorb a lot of impacts from riding through (off-road) hell, rather than your bikes chassis or engine that are worth thousands of dollars.
• Sandblasted to achieve the best possible adhesion of the coatings – it’s an extremely vital part of our manufacturing process. Sandblasted surfaces will withstand most surface scratches and give you a longer-lasting product.
• Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!

Compatibility:
Skid Plate: Compatible with 2019-2023 BMW R1250GS and BMW R1250GSA. Compatible with Outback Motortek lower crash bars only. This product is model specific, thus we supply skid plate marked accordingly. Outback Motortek lower crash bars must be installed in order to install the skid plate. Also compatible with original BMW centre stand.

Outback Motortek Crash Bar Combo - BMW R1250GS

Outback Motortek Crash Bar Combo - BMW R1250GS

Ultimate and torture tested protection combo for BMW R1250GS consisting upper and lower crash bars.

This protection combo provides coverage for the cylinder heads and plastic fairings.

LOWER CRASH BARS

• Quality 27mm/1.06″ steel tube with 2mm wall thickness.
• Hand MIG welded – It’s all about the strength! We continue to follow our philosophy: toughness and functionality over appearance.
• Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!
• Tough mounting points – No cutting corners here (either)! Precision laser cut pieces for perfect fitment using 5mm thick metal mounts. These parts absorb a lot of impacts from crashes, rather than your bikes chassis.

Compatibility:
Lower crash bars: Compatible with 2019-2023 BMW R1250GS. This product is model specific, thus we supply lower crash bars marked accordingly. Compatible with GSA model without the OEM upper crash bars. Compatible with original BMW sump guard/skid plate/bash plate. Not compatible with Option 719 Billet cylinder covers.

UPPER CRASH BARS

• Hand MIG welded – It’s all about the strength! We continue to follow our philosophy: toughness and functionality over appearance.
• Quality 25mm/1″ steel tube with 2mm wall thickness.
• Tough mounting points – No cutting corners here (either)! Precision laser cut pieces for perfect fitment using 4mm thick metal mounts. These parts absorb a lot of impacts from crashes, rather than your bikes chassis.
• Stainless Steel Hardware – These bolts and nut will always and forever look nice and shiny. Unless your bike is covered in mud and dust…
• Sandblasted to achieve the best possible adhesion of the coatings – it's an extremely vital part of our manufacturing process. Sandblasted surfaces will withstand most surface scratches and give you a longer-lasting product.
• Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!

Compatibility:
Upper crash bars: Compatible with 2019-2023 BMW R1250GS. Same upper crash bars for both 1200GS LC and 1250GS.

Outback Motortek Ultimate Protection Combo - BMW R1250GS

Outback Motortek Ultimate Protection Combo - BMW R1250GS

Ultimate and torture tested protection combo for BMW R1250GS consisting upper and lower crash bars and skid plate.This protection combo provides coverage for the cylinder heads, plastic fairings, exhaust header, catalytic converter and so on.

LOWER CRASH BARS

• Quality 27mm/1.06″ steel tube with 2mm wall thickness.
• Hand MIG welded – It’s all about the strength! We continue to follow our philosophy: toughness and functionality over appearance.
• Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!
• Tough mounting points – No cutting corners here (either)! Precision laser cut pieces for perfect fitment using 5mm thick metal mounts. These parts absorb a lot of impacts from crashes, rather than your bikes chassis.

Compatibility:
Lower crash bars: Compatible with 2019-2023 BMW R1250GS. This product is model specific, thus we supply lower crash bars marked accordingly. Compatible with GSA model without the OEM upper crash bars. Compatible with original BMW sump guard/skid plate/bash plate. Not compatible with Option 719 Billet cylinder covers.

UPPER CRASH BARS

• Hand MIG welded – It’s all about the strength! We continue to follow our philosophy: toughness and functionality over appearance.
• Quality 25mm/1″ steel tube with 2mm wall thickness.
• Tough mounting points – No cutting corners here (either)! Precision laser cut pieces for perfect fitment using 4mm thick metal mounts. These parts absorb a lot of impacts from crashes, rather than your bikes chassis.
• Stainless Steel Hardware – These bolts and nut will always and forever look nice and shiny. Unless your bike is covered in mud and dust…
• Sandblasted to achieve the best possible adhesion of the coatings – it”s an extremely vital part of our manufacturing process. Sandblasted surfaces will withstand most surface scratches and give you a longer-lasting product.
• Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!

Compatibility:
Upper crash bars: Compatible with 2019-2023 BMW R1250GS. Same upper crash bars for both 1200GS LC and 1250GS.

SKID PLATE

• Protects crucial areas of the engine.
• 5mm thick laser cut aluminum – Nothing is ever an overkill on an adventure bike, hence we choose to build our bash plates from this ridiculously tough and thick, yet lightweight material.
• Tough mounting hardware – No cutting corners here (either)! Precision laser cut pieces for perfect fitment using 5mm thick metal mounts. These parts absorb a lot of impacts from riding through (off-road) hell, rather than your bikes chassis or engine that are worth thousands of dollars.
• Sandblasted to achieve the best possible adhesion of the coatings – it’s an extremely vital part of our manufacturing process. Sandblasted surfaces will withstand most surface scratches and give you a longer-lasting product.
• Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!

Compatibility:
Skid Plate: Compatible with 2019-2023 BMW R1250GS and BMW R1250GSA. Compatible with Outback Motortek lower crash bars only. This product is model specific, thus we supply skid plate marked accordingly. Outback Motortek lower crash bars must be installed in order to install the skid plate. Also compatible with original BMW centre stand.