|
|
|
|
Outback Motortek Platinum Level Combo - BMW F800GS
Purchase this Platinum Level Combo to outfit your BMW F800GS with the basic adventure bike necessities.
LOWER CRASH BARS/ENGINE GUARDS
- Hand MIG welded – It’s all about the strength! We continue to follow our philosophy: toughness and functionality over appearance.
- Quality 27mm/1.06″ steel tube with 2mm wall thickness – any low quality steel tubing BELOW THESE SPECS will be crushed when your 450lbs bikes crashes into the ground. Our crash bars will take the beat!
- Less is often more. We didn’t try to cover the whole entire bike with crash bars that look like a cobweb. The F700/800GS models have very few tough mounting points, thus it makes more sense to create one solid and compact crash bar that stays close to the few mounting points instead of being far spread out that results in an overly flexible and “soft” structure. It will do more damage to your GS! Our compact and tough crash bars are the only way to go here to truly protect your BMW’s expensive and fragile parts.
- Tough mounting points – No cutting corners here (either)! Precision laser cut pieces for perfect fitment using 4mm thick metal mounts. These parts absorb a lot of impacts from crashes, rather than your bikes chassis that”s worth thousands of dollars.
- Stainless Steel Hardware – These bolts and nut will always and forever look nice and shiny. Unless your bike is covered in mud and dust…
- Sandblasted to achieve the best possible adhesion of the coatings – it”s an extremely vital part of our manufacturing process. Sandblasted surfaces will withstand most surface scratches and give you a longer-lasting product.
- Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!
Compatibility:
Lower Crash Bars: F650GS / F700GS / F800GS all years (parallel twin) – Does NOT fit 800GSA.
UPPER CRASH BARS
- Hand MIG welded – It’s all about the strength! We continue to follow our philosophy: toughness and functionality over appearance.
- Quality 27mm/1.06″ steel tube with 2mm wall thickness – any low quality steel tubing BELOW THESE SPECS will be crushed when your 450lbs bikes crashes into the ground. Our crash bars will take the beat!
- Easy mounting – Mounting the upper crash bars to the bottom ones are as easy as it gets. Really.
- Stainless Steel Hardware – These bolts and nut will always and forever look nice and shiny. Unless your bike is covered in mud and dust…
- Sandblasted to achieve the best possible adhesion of the coatings – it”s an extremely vital part of our manufacturing process. Sandblasted surfaces will withstand most surface scratches and give you a longer-lasting product.
- Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!
Compatibility:
Upper Crash Bars: Only F800GS 2008-2018 – Does NOT fit 800GSA.
SKID PLATE
- Protects crucial areas of the engine – oil pan,
engine case, oil cooler, oil filter and exhaust header! That’s a long
list of very expensive parts to expose to any sort of damage that will
reduce your bikes value in no time.
- Uniquely designed vent system – Not only unique but
very-well thought out. No unnecessary holes were designed on this bash
plate. As a result, your engine will less likely to overheat when mud
and all sorts of debris from offroading fly at the engine and get stuck
between the skid plate and the engine/exhaust header.
- True off road and adventure shape – What does that
even mean?? It means we have experience in building top-notch bash
plates. We avoid designing skid plates that are shaped like boxes, have
sharp edges and corners and will guaranteed to restrict your rides off
road. Ours are more, per se, aerodynamic and will glide over and gently
bounce off any object on your favorite trails.
- The only known design with ridges on the bottom of
the skid plate – Ridges help the skid plate glide over hard objects with
the least resistance. Most importantly though, these embossed ridges
will REINFORCE the bottom of this bash plate without adding unnecessary
weight.
- 4mm thick laser cut aluminum – Nothing is ever an
overkill on an adventure bike, hence we choose to build our bash plates
from this ridiculously tough and thick, yet lightweight material.
- Tough mounting hardware – No cutting corners here
(either)! Precision laser cut pieces for perfect fitment using 5mm thick
metal mounts. These parts absorb a lot of impacts from riding through
(off-road) hell, rather than your bikes chassis or engine that are worth
thousands of dollars.
- Stainless Steel Hardware – These quality bolts and nuts will always and forever look nice and shiny. Unless your bike is covered in mud and dust…
- Sandblasted to achieve the best possible adhesion
of the coatings – it’s an extremely vital part of our manufacturing
process. Sandblasted surfaces will withstand most surface scratches and
give you a longer-lasting product.
- Powder coated – combined with sandblasting it’s a
killer combination to protect your product’s surface. No frills and
tough just like your ADV/Dual Sport bike!
Compatibility:
Skid plate: F650GS* / F700GS* / F800GS and 800GSA all years (parallel twin, F650GS and F700GS models must have OEM rubber isolator in order to mount our skid plate).
REAR LUGGAGE RACK
- Made of 5mm thick aluminum – We don’t fool around
with flimsy, thin luggage racks. Outback Motortek rear luggage racks are
the real deal when it comes to packing alongside
Green Chile Adventure Gear tie down straps!
- Design – Multiple and nicely spread out
mounting/attaching holes. We focus on functionality before design, thus
our rear luggage racks are generously sized to securely keep you luggage
at its place. Guaranteed to work the best of all out there!
- Sandblasted to achieve the best possible adhesion
of the coatings – it’s an extremely vital part of our manufacturing
process. Sandblasted surfaces will withstand most surface scratches and
give you a longer-lasting product.
- Powder coated – combined with sandblasting it’s a
killer combination to protect your product’s surface. No frills and
tough just like your ADV/Dual Sport bike!
Compatibility:
Lower Crash Bars: F650GS / F700GS / F800GS all years (parallel twin) – Does NOT fit 800GSA.
|
|
|
|
|
|
|