 |
Centech AP-2 Fuse Panel
The AP-2 is a fuse panel needed to power auxiliary electrical devices. On motorcycles, the AP-2 operates items such as GPS, heated gloves and vests etc. without have to disrupt your electrical wiring. On other vehicles, the AP-2 is a second fuse panel need to protect your new wiring when adding item such as radios, GPS, driving lamps.
The AP-2 fuse panel is identical to the AP-1 panel with the exception that the AP-2 is divided into two electrical sections.
The main section contains three fuses and feeds five outputs while the second section has two fuses and three outputs. The advantage of having two sections allows the enthusiast to have fused power available for devices which need constant battery power and those which need to be switched “OFF” with the ignition key.
The AP-2 can handle a maximum of 60 amperes divided into a 40 ampere and 20 ampere section. The built-in GROUND section handles a maximum of 60 amperes. The AP-2 can be connected directly to the battery or to your ignition switch. For those with the CAN BUS system, the AP-130R wiring kit provides a relay and wiring.
Each AP-2 comes complete with fuses and necessary hardware, instructions and one year warranty.
OPTIONAL RELAY WIRING KIT
The AP-130R and the AP-170R assemblies consist of high performance relays and associated wiring need to operate the AP-1 and AP-2 fuse panels. These work especially well with the CAN BUS system and also work well with a standard ignition switch. s
Included with each kit is a high current relay needed to switch battery power to the fuse panel along with the necessary high temperature, color coded and labeled wire.
Wire is provided to operate the relay from a low current source such as a tail lamp. The AP-130R contains additional wire to provide power to the second section of the fuse panel AP-2.
Each kit comes complete with fuses and necessary hardware, instructions and one year warranty .
Order:
AP-130R for AP-2
AP-170R for AP-1
To order the Relay Wiring Kit separately
click here
|
|
|
