Denali LED Lighting 2-Light Kit

Denali LED Lighting 2-Light Kit
with Full Wiring Harness and M10 Mount

Part #TT-D1.KIT

Our Price $299.99
Mounting Kits see bottom of page

Twisted Throttle is proud to present Denali LED Lighting. The Denali D1 light kit was designed from the ground up specifically for use on motorcycles. The compact 2”-square lamps house ultra-bright LED's with an incredibly low draw of 0.75 amps each. A two lamp kit provides similar light output as dual 55-watt halogen kits on the market.

Denali LED lighting uses 10 watt LED technology. Each pod produces 900 lumens, making them the most efficient off-road lamp on the market. Unlike HID's which require a warm-up time, LED's are on at the flick of a switch!

Each two-lamp kit includes a full wiring harness, lighted water-resistant switch with relay, and two sets of lenses, so you can run the Denali LED's as driving lights with a narrow, focused beam pattern or as flood lights with a wider beam pattern. The Denali LED TT-D1.KIT ships with a universal M10 mount kit that works on most makes and models of bikes without any additional hardware. They can be wired to be triggered by your high beam switch, ignition key, or directly to battery for use when the bike is turned off (not recommended).

Kit components:
• 2 x Denali LED light pods
• full wiring harness with relay and switch
• 2 x universal M10 mounting brackets
• 2 x multi-link connectors
• 2 x 'Euro' driving beam lenses (15 degree beam pattern)
• 2 x fog beam lenses (25 degree beam pattern)
• installation instructions

The Denali LED's are housed in a rugged die-cast aluminum housing for optimum durability and heat dissipation. The housings are IP68 (ingress protection) rated so that they're impenetrable to dust and submersible under water up to 3 meters. The unbreakable polycarbonate lenses are housed by a 6061 aluminum face plate which doubles as a radiant heat sink to melt away snow and ice in frigid conditions. The Denali LED's have been subjected to a 14Grms vibration test to ensure their performance in high impact conditions.

Each pod housing features a 4-sided channel design that allows you to interlink multiple pods together in a row. This also allows for attachment of the various mounting hardware for flush mounting, bar mounts, and even helmet mounts.

Denali LED lighting uses a very pure, white light which runs at a brightness of about 5,000 Kelvin (K). Factory HID lighting usually runs at 4,200K, and aftermarket HID lighting can be anywhere from 6,000K up to 10,000K. However, at 6,000K and higher, blue light is introduced to the spectrum, and you lose distance, or penetration, that the beam can travel. Since the Denali LED lights keep the color temperature under 6,000K, we maximize brightness without losing distance. This makes them an ideal driving light!

Denali LED lighting carries a 10 year warranty against lamp failure. This does NOT cover crash or user-imposed damage.

Denali LED Lighting 2-Light Kit with Full Wiring Harness and M10 Mount. Exploded view shows how easy it is to swap lenses from 'Euro' driving beam to fog beam!

Close-up of weatherproof connector used throughout wiring harness.

Close-up of lighted on/off switch.

	Denali LED Lighting	HID Lights	Halogen Bulbs
Total Lumens	900	3500	850
Light Output Per Watt (Lumens)	90	100	15
Light Output Per Amp (Lumens)	1200	1200	185
Total Watts	10	35	55
Start Up Draw (Amps)	0.75	4.8	4.6
Running Draw (Amps)	0.75	2.92	4.6
Operating Life Span (Hours)	50,000	2,500	250

Here's a table comparing some common auxiliary lighting options with the Denali LED kit:

Light Switch Mount for PIAA and Denali light switches (BMW Motorcycles) by Techmount
more info >

Light Switch Mount for PIAA and Denali light switches (Metric Motorcycles) by Techmount
more info >

L-BRACKET BAR CLAMP
Description: These PIAA L-Brackets are lightweight, strong, easy-to-install and attractive. These brackets are made to mount practically any light to anywhere you have a bar. Available in multiple sizes and in black or chrome.

7/8" Twin Pack Black
Part #320-0267
1" Twin Pack Black
Part #320-0268
1- 1/8" Twin Pack Black
Part #320-0269

List price $40.99 Our Price $36.89

MOUNTING KITS
View Application Chart for more details

M5 Fender Mount Kit
Price $49.49

M6 Fender Mount Kit
Price $49.49

5/16 Fender Mount Kit
Price $49.49

BMW F650/800GS twin
Price $21.99

BMW K1200GT/K1200RS
Price $60.49

BMW K1200LT
Price $72.59

BMW R1150RT
Price $84.69

BMW R1200GS 08
Price $38.49

BMW R1200RT
Price $72.59

Kawasaki KLR650A 86-07
Price $49.49

Kawasaki KLR650E 08 -
Price $49.49

Kawasaki Versys
Price $49.49

KTM LC8 Adventure
Price $49.49

Suzuki DL650 DL1000
Price $41.29

Triumph Tiger 1050
Price $49.49